A Wood Case
This technique is really easy! You don’t need strange materials and you can create beautiful things. Today I’ll tell you how did I do a case (box).
1 - First of all, you have to sand down the wood with a thin sand paper.
2 - Once you have chosen the draw or the desing, you have to trace the draw on the wood. Scratch completely the back side of the draw with a pencil and then place the draw on the wool with the scratched side on the wood. Remark the draw without moving it. (This is the most difficult step!)
3 - Create the draw with a woodburner.
4 - Give a light sand down.
5 - Paint with sealant paint and when it’s dry repeat the process.
6 - Paint with the lacquer (choose the colours according to the design).
7 - When the lacquer is dry, varnish your work.
I hope you like this woodcraft 
January 5th, 2007 at 11:41 am
[…] The design is different and the case form too. It’s easier work over a flat surface than over a rounded one. That’s why, if you’ll do this kind of craft, I recommend you start with a flat surface. The how to is the same than in the other wood case. […]
January 13th, 2007 at 4:59 pm
[…] You know the technique, so check out the appropiate post to learn how to do woodburning. This time, I want to show you some ideas. You only need to buy the correct piece and make or copy a draw to woodburn. Nice cases […]